ISL29501-CS1Z Readme File
Product: Cat Shark
PN ISL29501-CS1Z REV A
April 27, 2016
By: Scott Jenney
Intersil Corporation
1001 Murphy Ranch Rd, Milpitas, CA 95035
(408) 432-8888
http://www.intersil.com/

Gerber files include:
file name						         Description
---------                                -----------
L1_TOP.art                               Copper Layer 1
L2_GND.art                               Copper Layer 2
L3_POWER.art                             Copper Layer 3
L4_BOTTOM.art                            Copper Layer 4
SMASK_TOP.art                            Solder Mask Top
SMASK_BOT.art                            Solder Mask Bottom
SILK_TOP.art                             Silk Screen Top
SILK_BOT.art                             Silk Screen Bottom
SPASTET.art                              Passte Mask Top
PASTE_BOTTOM.art                         Past Mask Bottom
FAB.art                                  Fabrication Drawing
ISL29501-CS1Z REV A FAB DWG.pdf          Fabrication Drawing
ASSY_TOP.art                             Top Side Assembly Drawing
ASSY_BOT.art                             Bottom Side Assembly Drawing
ISL29501-CS1Z REV A ASSY DWG.pdf         Assembly Drawing
ISL29501-CS1Z REV A.ipc                  IPC-D-365 Testing File
Readme ISL29501-CS1Z REV A FAB.txt       This File
ISL29501-CS1Z REV A-1-4.drl              Drill File
ART_APER.TXT                             Aperture File
ISL29501-CS1Z REV A BOM.xls              Assembly Bill of Material
ISL29501-CS1Z REV A SCHEMATIC.pdf        Schematic

There are 4 DRC errors that are acceptable.

1. Package to Package Spacing (17.9965 10.1492) 0 MM 3.81 MM NONE DESIGN Filled Rectangle "Sh1 Package Geometry/Place_Bound_Bottom" Shape "D7 Package Geometry/Place_Bound_Bottom" 
2. Package to Package Spacing (5.9970 10.1518) 0 MM 3.81 MM NONE DESIGN Filled Rectangle "Sh2 Package Geometry/Place_Bound_Bottom" Shape "D6 Package Geometry/Place_Bound_Bottom" 
3. Symbol Soldermask Alignment (18.0000 3.6900) 0.01 MM 0 MM SOLDERMASK_ALIGNMENT DESIGN Shape "Package Geometry/Soldermask_Bottom" Filled Rectangle "Sh1 Package Geometry/Place_Bound_Bottom" 
4. Symbol Soldermask Alignment (6.0000 3.6900) 0.01 MM 0 MM SOLDERMASK_ALIGNMENT DESIGN Shape "Package Geometry/Soldermask_Bottom" Filled Rectangle "Sh2 Package Geometry/Place_Bound_Bottom" 

V-Groove
The v-groove at x=0 and x=24mm are used to support the board mounting holes. Do not break or cut the board at those locations.